Products for concrete and masonry

SEARCH SOLUTION WIZARD BY

    SB 2375 Concrete and Grout Remover is an example of a new generation of cleaners designed for the removal of thin to moderately heavy deposits of concrete, mortar and grout without the use of hydrochloric acid.Up to ½ inch of cementitious material has been successfully removed from metal surfaces. Unlike traditional new masonry cleaners based on hydrochloric acid that attacks the surface of the cementitious deposit, SB 2375 is designed to penetrate the substrate and attack/weaken the bond of the cementitious ma

    Solution:

    SB 2376 Calcium Remover is an example of a new generation of cleaners designed for the removal of thin to moderately heavy deposits of concrete, mortar and grout without the use of hydrochloric acid. Up to ½ inch of cementitious material has been successfully removed from masonry and metal surfaces. Unlike traditional new masonry cleaners based on hydrochloric acid that attacks the surface of the cementitious deposit, SB 2376 is designed to penetrate the substrate and attack and weaken the bond of the cementiti

    Solution:

    SB 2377 is one of our newer cleaners designed for the removal of thin to moderately heavy deposits of concrete, mortar and grout without the corrosiveness of using muriatic and other acids. Based on a highly concentrated blend of surfactants and salts, SB 2377 has been used to remove ½ inch of cementitious materials from masonry and metal surfaces. SB 2377 is significantly less corrosive to metal surfaces than mineral acids, therefore enough material to remove stubborn deposits can be used without worries of da

    Solution:

    SB 2380 CSR Gel is a thickened blend of organic and inorganic chemicals with a strong ammonia odor. It is designed to dissolve and lift the green stains that result from copper, bronze and brass corrosion. These stains are usually found on exterior concrete, unpolished marble and limestone surfaces. The SB 2380 acts as a stand- alone cleaner and takes the place of both the cleaner and poultice in traditional cleaning methods. The viscosity of the product holds the dissolved copper in place to keep it from sprea

    Solution:

    SB 2381 CSR Liquid is a liquid blend of organic and inorganic chemicals with a strong ammonia odor. It is de- signed to dissolve and lift the green stains that result from copper, bronze and brass corrosion. These stains are usually found on exterior concrete, unpolished marble and limestone surfaces. SB 2381 is the same as SB 2380 except it is not thickened. It may be used as a pretreatment cleaner and additive for SB 2382 CSR Poultice to remove the last of deeper set stains. Often the SB 2380 CSR Gel alone is

    Solution:

    SB 2382 CSR Poultice is formulated specifically for the removal of deep-seated copper stains from masonry surfaces when mixed with SB 2381 CSR Liquid and, in some cases, with SB 2383 CSR Poultice Additive.SB 2382 is safe for use on most unpolished surfaces. The SB 2382 CSR Poultice is suitable for use on both exterior and interior applications.

    Solution:

    SB 2383 CSR Poultice Additive is formulated for addition to the paste made from mixing SB 2381 CST Liquid and SB 2382 CSR Poultice to enhance the removal of deep-seated copper stains from masonry surfaces. The SB 2383 aids in the removal of copper stains but also helps in the general cleaning of the surrounding masonry.SB 2383 is safe for use on unpolished surfaces. SB 2383 is mildly alkaline, low in odor, and can be used on exterior surfaces. SB 2383 is normally used at about 5-10% of the dry weight of the SB

    Solution:

    SB 2385 Architectural Copper Cleaner is a highly concentrated blend of salts and surfactants for use in the removal of oxides and corrosion products on architectural copper and many other metals. The product is designed for quick cleaning of the metal without the corrosiveness of muriatic and other acids. The cleaner can be used on ferrous, galvanized, and aluminum metals if properly diluted and contact time is controlled.

    Solution:

    SB 2392 Rust Converting Primer is the answer for stopping corrosion of ferrous metals. For iron based metals often found on the exterior of a masonry structure, not only does the coating protect the metal but it also reduces the chance of rust stains from appearing on the masonry below them. SB 2392 halts rust and prevents future corrosion with a durable protective barrier. The SB 2392 is a surface conditioner and primer that converts rust into a dark protective pigment that is embedded into a polymer coating. T

    Solution:

    SB 2400 is a solvent-free concentrated blend of siloxane and silane designed for jobsite dilution with clean water. The unique silicone micro emulsion creates an effective water repellent for a wide variety of substrates such as split face solid block, architectural concrete, clay brick, clay tile, sandstone and clay & concrete pavers. SB 2400 is an excellent means for protecting masonry from the accumulation of biological growth, water penetration leading to freeze/thaw damage, efflorescence and dirt accum

    Solution:

    SB 2401 is a solvent-free concentrated blend of siloxane and silane enhanced with a biostatic agent designed for jobsite dilution with clean water. The unique silicone micro emulsion creates an effective water repellent for a wide variety of substrates such as split face solid block, architectural concrete, clay brick, clay tile, sandstone and clay & concrete pavers. SB 2401 is protected against degradation by many types of microorganisms. SB 2401 is an excellent means for protecting masonry from the accumu

    Solution:

    SB 2405 Pro Guard PD (Pre-Diluted) is a ready to use water borne blend of stabilized siloxanes and silanes designed to provide protection from water intrusion on concrete, block, pavers, flagstone, terra cotta, sandstone and brick. SB 2405 is an excellent means for protecting masonry from the accumulation of water penetration leading to freeze/thaw damage, efflorescence, and dirt accumulation. Protection of this nature allows for a lengthening of substrate life. SB 2405 is formulated to penetrate deeply into the

    Solution:

    ShoreBest Matte Masonry Enhancers are moderately high solids treatments for darkening or changing the surface appearance of masonry. Typically they are used on cementitious substrates where a color enhancement is desired. When applied sparingly they have been used to bring the color of two slightly different brick surfaces to an acceptable appearance when there has been a change in the color of the brick due to either changes in the manufacturing material or a change in manufacturer between the original construc

    Solution:

    SB 2411 and SB 2415 Gloss Masonry Enhancers are to be used to create a gloss or glazed appearance on masonry that has either lost the original finish or to apply a finish to replacement masonry that does not match the original material. Examples would be replacement of terra cotta with cast stone that does not have a high gloss like the terra cotta or pol- lished concrete that has lost the gloss appearance due to acid rain deterioration. SB 2411 / SB 2415 may also be used to create special accents or effects on

    Solution:

    ShoreBest Matte Masonry Enhancers are moderately high solids treatments for darkening or changing the surface appearance of masonry. Typically they are used on cementitious substrates where a color enhancement is desired. When applied sparingly they have been used to bring the color of two slightly different brick surfaces to an acceptable appearance when there has been a change in the color of the brick due to either changes in the manufacturing material or a change in manufacturer between the original construc

    Solution:

    SB 2411 and SB 2415 Gloss Masonry Enhancers are to be used to create a gloss or glazed appearance on masonry that has either lost the original finish or to apply a finish to replacement masonry that does not match the original material. Examples would be replacement of terra cotta with cast stone that does not have a high gloss like the terra cotta or pol- lished concrete that has lost the gloss appearance due to acid rain deterioration. SB 2411 / SB 2415 may also be used to create special accents or effects on

    Solution: