![]() |
|||||||||
| Home | About ShoreBest | Cross Reference | |||||||||
| |
|||||||||
| New Masonry Cleaners |
Rest- oration Cleaners |
Paint Strippers | Remedial Products | Water Repellents | Environ-mental Products | Concrete Products | EIFS Appearance System |
||
|
2723 ASR Safe Alkalinity Restorer
ShoreBest 2723 ASR Alkalinity Restorer is designed to restore concrete alkalinity lost to carbonation, exposure to natural or manmade acidity, or intentional cleaning/etching by muriatic acid. 2723 is formulated with FMC Lithium® Lifetime® SL lithium hydroxide so it is safe for use on both normal and alkali-silica reaction (ASR) sensitive concrete. This product contains a unique blend of other ingredients to assure quick wetting and deep penetration into the concrete surface. Unlike more conventional products based on sodium or potassium hydroxides, the lithium ion will not promote efflorescence or lead to water sensitivity. 2723 ASR Safe Alkalinity Restorer is recommended for use before treatments with silicate based hardeners / densifiers. Preparation
Provide protection for pedestrians, vehicles, roofing and foliage. Test all other non-masonry surfaces for negative reactions and provide protection where required. Remove all loose materials from the surface prior to application. Protect all surrounding areas from possible damage due to spillage or drippage during application.2723 will attack soft metals such as aluminum and zinc (galvanized steel). Prolonged contact may etch glass. All projects should start with a test application to determine suitability of the material for the chosen project, method of application and dwell time. Application
Apply by sprayer, roller, or synthetic bristle brush to dry concrete and work into the pores if necessary. Do not use aluminum or galvanized equipment. Brushes should be made with synthetic bristles as the material will degrade natural fibers. Allow the product to work on the surface for at least 15 minutes or longer depending on the porosity and temperature. Apply multiple coats as needed to raise the pH of the concrete to at least 10 at the target depth. After final product application, spray or mist with water to drive material deeper into the concrete. Failure to do so may result in formation of a high pH white slat on the surface. If white surface coating appears, reapply water to force the product in or scrub excess off surface. Technical Data
Limitations
2722 ASRestore Treatment B is for use by professional contractors only. Multiple applications may be necessary to mitigate ASR. Preparing concrete with proper products is essential for best coverage. Keep from freezing. Safety
All applicators must use OSHA recommended equipment. 2723 solution is corrosive to skin and eyes. It will cause irritation to the skin, eyes and mucous membranes. Keep out of the reach of children. May be fatal if ingested. The risk to your health depends upon the amount of exposure. Close the container after each use.. Do not alter with any other materials. Refer to the proper MSDS Sheet or call Shore Corporation for information regarding persons exposed to or reacting to the stripper. Warranty
Shore Corporation warrants that this product conforms to the chemical composition described in the Product Label. SHORE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Shore Corporation shall not be responsible for any direct or consequential damages sustained as a result of the use of this product. Further, Shore Corporation shall not be liable for personal injuries, property damage or any other damages as a result of the use of this product, the sole responsibility of Shore Corporation under the within WARRANTY being the replacement of any nonconforming product. Acceptance and use of this product absolves Shore Corporation from any such liability whatsoever and from whatever source. The within WARRANTY may not be modified or extended by Shore Corporation representatives or distributors, neither of which are empowered to make any product representation inconsistent with the terms hereof. Customer Service & Technical Assistance
Factory personnel can be contacted at 1-412-471-3330 for specific recommendations without any obligation. Factory trained representatives are available in many locations to assist with project recommendations and dealer locations for purchase of materials. Call 1-412-471-3330 for the name and location of your nearest representative or dealer. |
Home | Products | Cross Reference | Warranty | Company | Projects 800.860.4978 | infoproducts@shorebest.com | © 2003 Shore Corporation |