2660 EIFS Graffiti Remover


		Home \| About ShoreBest \| Cross Reference

New Masonry Cleaners	Rest- oration Cleaners	Paint Strippers	Remedial Products	Water Repellents	Environ-mental Products	Concrete Products	EIFS Appearance System

Description

2660 EIFS Graffiti Remover is a “green” blended solvent provided for the removal of most graffiti from EIFS surfaces that have been successfully treated with undiluted 2650 EIFS Protective Clear Coat. It may be effective in removing some graffiti from other untreated surfaces. 2660 is miscible with water for easy rinsing with a brush and water or a pressure washer. Do not add water to 2660 prior to use.

Technical Data

Appearance: Light Yellow Liquid	Solubility: Dispersible in water
Biodegradable: 100%	Odor: Mild
pH Level: 4-5 (10% in water)	Flash Point: 150 degrees F
Stability: Stable	Specific Gravity: 0.95
d

Preparation & Application

Provide protection to all surfaces and materials that might be harmed upon exposure to a solvent cleaner. Test all surfaces prior to general use of the product. Take precautions to protect foliage, avoid spillage into drains or other areas that might create an adverse effect, including exposure to open flames. Testing should include all type of graffiti where more than one type of graffiti is to be removed.

Apply with natural bristle brush, rag waste or old toweling. Do not alter the product with water or any other solvent prior to application. Allow a 5 to 15 minute dwell time, based upon prior testing, and remove with a clean rag and solvent. A pressure washer may be beneficial for removal from some surfaces. Repeat if necessary.

Limitations

2660 should be used by professionals only. Do not use 2660 on any surface or for any purpose other than those recommended in the data sheet. Dispose of all waste and containers according to local rules and regulations. Incorrect disposal can be a fire hazard.

Safety

All applicators must wear protective equipment to avoid absorption into the skin, exposure to the eyes and respirators for inhalation. Keep out of the reach of children. Inhalation may cause irritation and dizziness. Do not ingest this product. For persons exposed to or reacting to this product, refer to the proper MSDS Sheet for treatment.

Customer Service

Factory personnel can be contacted at 1-412-471-3330 for specific recommendations without any obligation.

Factory trained representatives are available in many locations to assist with project recommendations and dealer locations for purchase of materials. Call 1-412-471-3330 for the name and location of your nearest representative or dealer.