 |
|||||||||
 |
Home | About ShoreBest | Cross Reference | ||||||||
 |
 |
 |
 |
 |
 |
 |
 |
||
| New Masonry Cleaners |
Rest- oration Cleaners |
Paint Strippers | Remedial Products | Water Repellents | Environ-mental Products | Concrete Products | EIFS Appearance System |
||
|
2510 Alkaline Neutralizer
2510 Alkaline Neutralizer is a dry powdered material for use in the reduction of the pH of alkaline rinse water as it reaches the ground during the cleaning or stripping of paint from masonry surfaces. 2510 can be spread around the drop area of a structure or mounded around drains, gutters and hard surface paving to neutralize the alkali-laden rinse water prior to outflow from the work area. In order to meet many EPA requirements, the objective is to adjust the runoff to a pH of 7, plus or minus 1, during the operation. Preparation & Application
Determine the area or areas where rinse water will be flowing from the structure or into the ground. For ground absorption, apply a liberal coating of 2510 to the area where rinse water will come in contact with the soil. The drop area is generally two to three feet from the base of the structure. For drains and hard surface paving, construct a mounded catch barrier two to three inches in height of 2510. All of the effluent requiring neutralization is to pass through this barrier in order to effect neutralization. From time to time, pH paper is to be soaked in the rinse solution after it has passed through the barrier. Compare the color change to the color guide and change the barrier when the pH reading of 8 or higher has occurred. After several readings, a timing factor can be determined as to how often the pH reading might be required. Once the pH exceeds 8, remove and replace the spent material. Dispose of the spent material according to local, state and federal requirements.
Limitations
2510 Alkaline Neutralizer is for use by professional contractors only. All data applies to ShoreBest products only and may no be applicable to other manufacturers products. Exposure to highly concentrated alkalis will result in the release of irritating smoke, carbon monoxide and carbon dioxide. 2510 Alkaline Neutralizer is not suitable for indoor use.
Technical Data
50 pounds of 2510 Alkaline Neutralizer will neutralize 0.78 pound-equivalents of alkali. This is equivalent to 31 pounds of solid sodium hydroxide (NaOH). Safety
This product must be used only as directed. Safety matters included with product. MSDS available from your regional representative.
Customer Service & Technical Assistance
Factory personnel can be contacted at 800/860-4978 for specific recommendations without any obligation.
Factory trained regional representatives are available to assist with product recommendations for you projects, and many locations are served by dealers who stock ShoreBest products. Call 800/860-4978 for the name and location of your nearest representative or dealer. |
Home | Products | Cross Reference | Warranty | Company | Projects 800.860.4978 | infoproducts@shorebest.com | © 2003 Shore Corporation |