 |
|||||||||
 |
Home | About ShoreBest | Cross Reference | ||||||||
 |
 |
 |
 |
 |
 |
 |
 |
||
| New Masonry Cleaners |
Rest- oration Cleaners |
Paint Strippers | Remedial Products | Water Repellents | Environ-mental Products | Concrete Products | EIFS Appearance System |
||
|
2400 Combipel 100
Silane/Siloxane
2400 is a solvent-free concentrated blend of siloxane and silane designed for jobsite dilution with clean water. The unique silicone micro emulsion creates an effective water repellent for a wide variety of substrates such as split face solid block, architectural concrete, clay brick, clay tile, sandstone and clay & concrete pavers. 2400 is an excellent means for protecting masonry from the accumulation of biological growth, water penetration leading to freeze/thaw damage, efflorescence and dirt accumulation. Protection of this nature allows for a lengthening of substrate life. 2400 is formulated to not cause a color change when properly diluted. 2400 physically and chemically bonds to the substrate, is UV stable, VOC Compliant and is highly vapor permeable. VOC Content and Regulations
VOC stands for volatile organic compounds. While the actual definition is complex and depends on the type of products in which they are used, VOCs can generally be thought of as the solvent content of consumer products like polishes, cleaners, and paint removers and architectural and industrial maintenance coatings like paints and water repellants. Regulating (restricting) the amount of VOCs in products is one of the many ways government entities are trying to reduce air pollution by controlling the amount of hydrocarbons released into the atmosphere...Click here to read more about VOC regulations. Dilution Ratios
Preparation & Application
All surfaces must be clean, subsurface and surface dry. Protect all foliage, windows, adjacent surfaces that are not to receive the treatment, vehicle and pedestrian traffic. Close off all ventilation and other means of entry into the structure. Dilute the 2400 according to specifications or the suggested rates outlined in this document. Using the method to be used on the project, apply an area of 10 square feet to determine the consumption rate. A spray application is preferred but roller and brush application may be acceptable for some projects. Apply with low pressure spray (20 p.s.i.) taking care not to atomize the fluid. For vertical surfaces, a flood coat is required where a run down of 6 to 10 inches is obtained below the application point. When used for very porous surfaces, a wet on wet application will give the best results. On dense surfaces only a single application is required. Clean all equipment with soap and water.
Limitations
Dilute 2400 with clean water only. Do not apply when the surface and ambient temperature are below 40 degrees F or when rain is expected with 8 hours. All diluted material must be used with 72 hours of dilution. Reseal the 2400 concentrate container after each use. Maximum storage of concentrate is one year after purchase when protected from sunlight and stored at temperatures above freezing. Full water repellency is not reached until 72 hours after application. Do not recoat surfaces after they have dried. 2400 is not recommended for interior application. Take all precautions to avoid spillage resulting in discharge into waters and sewage intakes.
Technical Data
Safety
This product must be used only as directed. Safety matters included with product. MSDS available from your regional representative.
Customer Service & Technical Assistance
Factory personnel can be contacted at 800/860-4978 for specific recommendations without any obligation.
Factory trained regional representatives are available to assist with product recommendations for you projects, and many locations are served by dealers who stock ShoreBest products. Call 800/860-4978 for the name and location of your nearest representative or dealer. |
||||||||||||||
Home | Products | Cross Reference | Warranty | Company | Projects 800.860.4978 | infoproducts@shorebest.com | © 2003 Shore Corporation |