2365 Artillery Spores and More


		Home \| About ShoreBest \| Cross Reference

New Masonry Cleaners	Rest- oration Cleaners	Paint Strippers	Remedial Products	Water Repellents	Environ-mental Products	Concrete Products	EIFS Appearance System

2365 Artillery Spores and More is a non-acid cleaner for the general maintenance and cleaning of EIFS surfaced buildings, aluminum and vinyl siding. 2365 is specially formulated to provide the extended dwell time to allow the removal of very tenacious biological growth like artillery spores as well as atmospheric soiling, auto and diesel exhaust, some oxidation stains and most organic growth.

Preparation

Provide protection for foliage and pedestrian traffic. Test all surfaces which might be exposed to product for possible adverse reactions. Protect all surfaces and surrounding areas from possible damage which might occur from spillage or spray during usage. All projects should start with a test application to determine the suitability of the cleaner, acceptable application method and dilution ratio if applicable. Test areas of at least 10 square feet are recommended and should involve the most severely contaminated condition. When possible, the test area should be left to dry in order to check for any latent reaction that might require a change in methods or products.

Application

2365 Artillery Spores and More may be applied by airless spray, synthetic fiber brush or roller. Brush agitation may be helpful on some projects. Dwell times may vary from five to thirty minutes. For removal of artillery spores dwell times of 1 1/2 to 2 hours may be needed. Do not allow the cleaner to dry on the surface. Removal of the cleaner and contamination can be accomplished with high pressure rinsing equipment. Care should be taken in the selection of the wand tip to avoid damage to the EIFS surface. In all cases, a thorough rinsing is required.

Limitations

ShoreBest™ 2365 Artillery Spores and More is for use by professional contractors only. Projects should not be undertaken when temperatures are below 50 degrees F. Do not allow the cleaner to dry on the surface. Misting of drying cleaner is permissible to avoid possible reapplication. Do not use on polished masonry.

Technical Data

Appearance: viscous off white liquid	Solubility: Complete
Flash Point: None	Odor: faint citrus
Stability: Stable	pH Level: 14

Safety

All applicators must wear OSHA recommended protective equipment. Artillery Spores and More contains Potassium Hydroxide. Avoid contact with skin, eyes and clothing. Diluted and undiluted product can cause burns. Keep out of the reach of children. Do not ingest or inhale the cleaner, modify the cleaner with any material other than water or use the cleaner for any non-recommended purpose. Refer to the proper MSDS Sheet for treatment of persons exposed to or reacting to the cleaner.

Customer Service & Technical Assistance

Factory personnel can be contacted at 1-412-471-3330 for specific recommendations without any obligation. Factory trained representatives are available in many locations to assist with project recommendations and dealer locations for purchase of materials. Call 1-412-471-3330 for the name and location of your nearest representative or dealer.