2340 Graffiti Remover


		Home \| About ShoreBest \| Cross Reference

New Masonry Cleaners	Rest- oration Cleaners	Paint Strippers	Remedial Products	Water Repellents	Environ-mental Products	Concrete Products	EIFS Appearance System

2340 Graffiti Remover is a custom blend of solvents designed to remove many types of graffiti from painted surfaces without removing the base paint. 2340 has been used to remove graffiti from traffic boxes, highway signs, vinyl siding, glass, metal surfaces, lockers and metal garage doors.



The Foundry Project: graffiti removal using SB 2340 Graffiti Remover	graffiti removal (close up)

(click here to see results from other projects)

Preparation

Provide protection to all surfaces and materials that might be harmed upon exposure to a solvent cleaner. Test all surfaces prior to general use of the product. Take precautions to avoid spillage into drains or other areas that might create an adverse effect, including exposure to open flames. Testing should include all type of graffiti where more than one type of graffiti is to be removed.

Application

Apply with natural bristle brush, rag waste or natural sponge. Do not alter the product with water or any other solvent prior to application. Allow a 5 to 15 minute dwell time, based upon prior testing, and remove with water or clean solvent such as mineral spirits. Repeat if necessary.

Limitations

2340 should be used by professionals only. Do not expose to heat, sparks or open flames. Do not smoke while using this product. Do not use without adequate ventilation. Some surfaces might not be acceptable for use of 2340. Testing is required before the start of general usage.

Technical Data

Appearance: Clear Liquid	Solubility: Not soluble in water
Biodegradable: No	Odor: Medium petroleum
pH Level: N/A	Flash Point: 140 degrees F
Stability: Stable	Specific Gravity: 0.87

Projects

See pictures from some projects that used Copper Stain Remover.

Safety

This product must be used only as directed. Safety matters included with product. MSDS available from your regional representative.

Customer Service & Technical Assistance

Factory personnel can be contacted at 800/860-4978 for specific recommendations without any obligation.

Factory trained regional representatives are available to assist with product recommendations for you projects, and many locations are served by dealers who stock ShoreBest products. Call 800/860-4978 for the name and location of your nearest representative or dealer.