2320 Poultice - ShoreBest


		Home \| About ShoreBest \| Cross Reference

New Masonry Cleaners	Rest- oration Cleaners	Paint Strippers	Remedial Products	Water Repellents	Environ-mental Products	Concrete Products	EIFS Appearance System

2320 Poultice

2320 Poultice is formulated to be a general-purpose poultice for the removal of deep-seated soil stains from masonry surfaces. 2320 is safe for use on polished and unpolished surfaces. 2320 is non-acidic, low in odor, can be used on interior and exterior surfaces and may be blended with certain ShoreBest cleaners and other products to remove many problem stains. Consult with your ShoreBest Representative or Shore Chemical for recommended additives based upon your description of the stain conditions.

Preparation

2320 Poultice is mixed with water or special additives to a paste consistency that will hang on a vertical surface. Standard plasterers tools and mixing devices are customary for the preparation of the product and application to the surface. Protect all surfaces that are not to receive an application of 2320 Poultice. Apply a test sample to the project surface to determine the suitability of the cleaner, acceptable application method, thickness and required dwell time to effect the desired cleaning.

Application

Using a broad knife, trowel or other application method, apply a uniform layer of 2320 Poultice to a thickness of ¼ to ½ inch of product. Application method should ensure that there are no voids that will cause stains to remain in the surface. Before the poultice dries, cover the surface with a lightweight plastic sheet. Avoid air pockets when applying the plastic sheet. Air pockets may allow the poultice to dry prematurely. Allow the poultice to remain on the surface for 12 to 48 hours as determined by previous testing. If the poultice is very damp after removal of the plastic sheeting, allow the poultice to dry for several hours prior to removal.

Remove the poultice with plastic or wood scrappers, taking care to avoid marring the surface. Remove as much poultice as possible and rinse with wet sponges, toweling or soft brushes. All poultice residue must be removed to avoid a white film appearing on the surface. Allow the surface to dry and repeat the application where necessary.

Limitations

2320 Poultice is for use by professional contractors only. Keep out of the reach of children. Application to surfaces that are below 50 degrees F may not react as expected. Usage at temperatures below 70 degrees F may require extended dwell times. Do not use when temperatures are expected to drop below 40 degrees F during the projected dwell time.

Technical Data

Appearance: Gray Powder	Odor: Low
Flash Point: None	pH: 10 (may change with additives)
Coverage is approximately 2 to 3 square feet per pound depending upon application thickness.

Safety

This product must be used only as directed. Safety matters included with product. MSDS available from your regional representative.

Customer Service & Technical Assistance

Factory personnel can be contacted at 800/860-4978 for specific recommendations without any obligation.

Factory trained regional representatives are available to assist with product recommendations for you projects, and many locations are served by dealers who stock ShoreBest products. Call 800/860-4978 for the name and location of your nearest representative or dealer.