 |
|||||||||
 |
Home | About ShoreBest | Cross Reference | ||||||||
 |
 |
 |
 |
 |
 |
 |
 |
||
| New Masonry Cleaners |
Rest- oration Cleaners |
Paint Strippers | Remedial Products | Water Repellents | Environ-mental Products | Concrete Products | EIFS Appearance System |
||
|
2230 Shore Strip
2230 Shore Strip is a fast acting paint stripper for use in the removal several layers of latex, oil based, enamel, or
spray paints from concrete, masonry, or metal in a quick and efficient manner. 2230 easily meets all Federal and
OTC VOC standards for Paint Strippers and Graffiti Removers. It can also be used to remove sealers, waxes,
lacquers, and other coatings. 2230 works similar to the methylene chloride based paint strippers without the harmful
effects on people or the environment.
Preparation
Provide protection for pedestrians, vehicles, roofing and foliage. Test all other non-masonry surfaces for negative reactions and provide protection where required. Remove all loose materials from the surface prior to application. Protect all surrounding areas from possible damage due to spillage or drippage during application. All projects should start with a test application to determine suitability of the material for the chosen project, method of application and dwell time.Application
Apply 2230 undiluted with solvent resistant brushes or rollers. Allow the remover to work for 15 minutes and remove with high pressure water. Brush agitation of the material may not be helpful. Caution; do not allow the remover to dry on the surface. Reapplication will be required to correct for dried material. Neutralization of the surface, after removal, is not required.Limitations
SB 2230 Shore Strip is for use by professional contractors only. Spray application is not recommended. Beware of drift during application and removal of the material. Extremely porous surfaces may require an additional application. Do not reapply until the surface is dry. Do not make the first application to a damp or wet surface. A wet or damp surface will result in either poor performance or a failure to perform situation. Do not allow vapors to enter the structure.Technical Data
Safety
All applicators must use OSHA recommended equipment. 2230 SB Paint Remover will cause irritation to the skin, eyes and mucous membranes. Keep out of the reach of children. May be fatal or cause blindness if ingested. Inhaling the vapors may cause dizziness, headache, nausea or brain damage. The risk to your health depends upon the amount of exposure. Keep away from open flame. Do not shake the container prior to opening. Close the container after each use. Do not use in confined areas without proper ventilation. Do not alter 2230 with any other materials. Refer to the proper MSDS Sheet or call Shore Corporation for information regarding persons exposed to or reacting to the stripper.Customer Service & Technical Assistance
Factory personnel can be contacted at 1-412-471-3330 for specific recommendations without any obligation. Factory trained representatives are available in many locations to assist with project recommendations and dealer locations for purchase of materials. Call 1-412-471-3330 for the name and location of your nearest representative or dealer. |
Home | Products | Cross Reference | Warranty | Company | Projects 800.860.4978 | infoproducts@shorebest.com | © 2003 Shore Corporation |