2210 SB Paint Remover


		Home \| About ShoreBest \| Cross Reference

New Masonry Cleaners	Rest- oration Cleaners	Paint Strippers	Remedial Products	Water Repellents	Environ-mental Products	Concrete Products	EIFS Appearance System

2210 SB Paint Remover is a thick, clinging, fast acting, solvent based paint remover for use in the removal of epoxies, certain polyurethanes, enamels and other coatings from masonry, wood and metal surfaces. It is also helpful in the removal of oils, tars, greases and waxes from masonry, concrete decks and terrazzo floors. 2210 can be used in the removal of graffiti done with marking pens, some spray paints, lacquers and automotive primers. 2210 is non-flammable, non-acid and non-caustic.

Preparation

Provide protection for pedestrians, vehicles, roofing and foliage. Test all other non-masonry surfaces for negative reactions and provide protection where required. Remove all loose materials from the surface prior to application. Protect all surrounding areas from possible damage due to spillage or drippage during application.

All projects should start with a test application to determine suitability of the material for the chosen project, method of application and dwell time.

Application

Apply 2210 with solvent resistant brushes or rollers. Allow the remover to work for 15 minutes and remove with high pressure water. Brush agitation of the material may not be helpful. Caution; do not allow the remover to dry on the surface. Reapplication will be required to correct for dried material. Neutralization of the surface, after removal, is not required.

Limitations

SB 2210 Paint Remover is for use by professional contractors only. Do not use on painted surfaces for graffiti removal. Spray application is not recommended. Beware of drift during application and removal of the material. Extremely porous surfaces may require an additional application. Do not reapply until the surface is dry. Do not make the first application to a damp or wet surface. A wet or damp surface will result in either poor performance or a failure to perform situation. Do not allow vapors to enter the structure.

2210 is not recommended for furniture or other sensitive painted or varnished surfaces. 2210 will not remove cementitious coatings. If a ghost remains in the surface after two applications contact Shore Chemical for other possible corrective action.

Technical Data

Appearance: Viscous Yellow Liquid	Odor: Strong Solvent
Solubility: Emulsifiable	Stability: Stable
Density: 12 Lbs./Gal.	PH: 11
Flash Point: None
Coverage is 50 to 100 square feet depending upon surface texture.

Safety

All applicators must use OSHA recommended equipment. 2210 SB Paint Remover will cause irritation to the skin, eyes and mucous membranes. Keep out of the reach of children. May be fatal or cause blindness if ingested. Inhaling the vapors may cause dizziness, headache, nausea or brain damage. The risk to your health depends upon the amount of exposure. Keep away from open flame. Do not shake the container prior to opening. Close the container after each use. Do not use in confined areas without proper ventilation. Do not alter 2210 with any other materials. Refer to the proper MSDS Sheet or call Shore Corporation for information regarding persons exposed to or reacting to the stripper.

Customer Service & Technical Assistance

Factory personnel can be contacted at 800/860-4978 for specific recommendations without any obligation.

Factory trained regional representatives are available to assist with product recommendations for you projects, and many locations are served by dealers who stock ShoreBest products. Call 800/860-4978 for the name and location of your nearest representative or dealer.