Products for concrete and masonry


SB2851 Stone Seal

SB 2851 Stone Seal can be safely used on any indoor non-resilient floor surface not normally harmed by water.It produces a high gloss, colorless film that is durable, resists scuffing and retains gloss under scrubbing. This product is designed for marble, terrazzo, quarry tile, ceramic tile, granite, slate, terra cotta and concrete. SB 2851 can be buffed to a high gloss and is strippable with an alkaline stripper like SB 2846.


Thoroughly scrub floor using a quality stripper like SB 2846 to remove the previous finish. Stripping must be followed by neutralizer like SB 2130 prior to application of SB2851 StoneSeal. Make sure the surface is clean and dry before application of the SB 2851. In areas where foot traffic is expected to be very heavy it is recommended to apply a base coat of SB 2850 Floor Seal and use SB 2851 Stone Seal as the top coat maintenance finish

Dilution and Coverage

Dilution: 0 to 2 parts water to 1 part product — test application recommended.

Coverage: Dependent upon substrate and other conditions.


Apply SB 2851 with a lamb’s wool or microfiber pad (wax) applicator. It is very important to apply in thin even coats for best appearance. Coverage should be in the range of 600 to 1000 sq ft per gallon per coat. It will spread evenly and dry to a beautiful gloss that will last for several buffings.

For the first application, 2 to 4 coats are highly recommended. Allow a 35 to 45 minute dry time between each application.
This finish is keyed to ammonia removal. Do not use ammonia-containing cleaners for general maintenance. Use SB 2180 or another quality neutral cleaner for routine maintenance cleaning. This floor finish can be buffed but check for unevenness of the surface prior to buffing. To maintain appearance between scheduled strippings, or to repair “damaged” areas, a thin coat of a mixture of 2 parts water to 1 part SB 2851 can be used.

Technical Data

  • Appearance:White Emulsion
  • Biodegradable: Yes
  • Flash Point: None
  • Odor: mild
  • pH:8 to 9
  • Rinsing: Complete
  • Solubility: 100%
  • Stability: Good


Causes serious eye irritation. Suspected of damaging fertility or the unborn child.Refer to product SDS or product label for hazard statements, precautionary statements and safety information


Shore Corporation warrants that this product conforms to the chemical composition described in the Product Label. SHORE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Shore Corporation shall not be responsible for any direct or consequential damages sustained as a result of the use of this product. Further, Shore Corporation shall not be liable for personal injuries, property damage or any other damages as a result of the use of this product, the sole responsibility of Shore Corporation under the within WARRANTY being the replacement of any nonconforming product. Acceptance and use of this product absolves Shore Corporation from any other such liability whatsoever and from whatever source. The within WARRANTY may not be modified or extended by Shore Corporation representatives or distributors, neither of which are empowered to make any product representation inconsistent with the terms hereof.


Trained representatives are available to assist with project assistance and product recommendations. Call 412/471-3330.

  • This field is for validation purposes and should be left unchanged.