Products for concrete and masonry

SEARCH SOLUTION WIZARD BY

SB2171 Marble Cleaning Gel

SB 2171 Marble Cleaner Gel is for use in the removal of accumulations of dirt, grease, and soap deposits from marble and many other hard surfaces. SB 2171 is also safe for use on porcelain, tile, enamels and most metal surfaces. Regular use of SB 2171 will also help prevent the re-soiling of the substrate. This product is not recommended for use on painted or plastic surfaces. The SB 2171 is slightly gelled to allow better rinsing than competitive cleaners.

Preparation

Provide protection for foliage and pedestrian traffic. Test all surfaces which might be exposed to product for possible adverse reactions. Protect all surfaces and surrounding areas from possible damage which might occur from spillage or spray during usage.

All projects should start with a test application to determine the suitability of the cleaner, acceptable application method and dilution ratio if applicable. Test areas of at least 10 square feet are recommended and should involve the most severely contaminated condition. When possible, the test area should be left to age for 10 or more days to check for any latent reaction that might require a change in methods or products.

Coverage Dilution and

Dilution: 0 to 3 parts water to 1 part product — test application recommended

Coverage: Dependent upon substrate and other conditions

Application

Apply the cleaner with a brush, sponge, mop or rag. Allow the cleaner to remain on the surface five to ten minutes, as based on test results. Gently rub if necessary and give a thorough rinse with warm or cold water. Reapplication may be necessary.

Technical Data

  • Appearance: Blue Gel
  • Biodegradable: Yes
  • Flash Point: > 200 F
  • Foaming:
  • Odor: Mild Alcohol
  • pH: 8
  • Rinsing: Complete
  • Solubility: 100%
  • Stability: Good
  • Wetting Ability: Excellent

Safety


Flammable liquid and vapor. Causes mild skin irritation. Causes serious eye damage.
Refer to product SDS or product label for hazard statements, precautionary statements and safety information.

Warranty

Shore Corporation warrants that this product conforms to the chemical composition described in the Product Label. SHORE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Shore Corporation shall not be responsible for any direct or consequential damages sustained as a result of the use of this product. Further, Shore Corporation shall not be liable for personal injuries, property damage or any other damages as a result of the use of this product, the sole responsibility of Shore Corporation under the within WARRANTY being the replacement of any nonconforming product. Acceptance and use of this product absolves Shore Corporation from any other such liability whatsoever and from whatever source. The within WARRANTY may not be modified or extended by Shore Corporation representatives or distributors, neither of which are empowered to make any product representation inconsistent with the terms hereof.

Contact

Trained representatives are available to assist with project assistance and product recommendations. Call 412/471-3330

  • This field is for validation purposes and should be left unchanged.