SB 2660 EIFS Graffiti Remover is a specially formulated blend of solvents and surfactants designed to remove graffiti from surfaces previously treated with SB 2650 EIFS Protective Clear Coat. Unlike the petroleum based solvents used in many ordinary paint strippers, SB 2660 uses solvents derived from renewable plant sources. In addition to the environmentally friendly attributes, like biodegradability and renewability, these solvents are also less likely to damage if incidental contact with the EIFS EPS board occurs.
Provide protection to all surfaces and materials that might be harmed upon exposure to a solvent cleaner. Test all surfaces prior to general use of the product. Take precautions to protect foliage, avoid spillage into drains or other areas that might create an adverse effect, including exposure to open flames. Testing should include all types of graffiti where more than one type of graffiti is to be removed.
Dilution: This product is used undiluted — test application recommended.
Coverage: Dependent upon substrate and other conditions.
Apply with natural bristle brush, rag or solvent resistant sprayer. Do not alter the product with water or any other solvent prior to application. Allow a 5 to 15 minute dwell time, based upon prior testing, and remove with a clean rag and solvent. A pressure washer may be beneficial for removal from some surfaces. Repeat if necessary.
SB 2660 should be used by professionals only. Do not use SB 2660 on any surface or for any purpose other than those recommended in the data sheet. Dispose of all waste and containers according to local laws and regulations. Incorrect disposal can be a fire hazard. Do not return contaminated product back to original container.
Causes mild skin irritation. Causes serious eye damage.Refer to product SDS or product label for hazard statements, precautionary statements and safety information
Shore Corporation warrants that this product conforms to the chemical composition described in the Product Label. SHORE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Shore Corporation shall not be responsible for any direct or consequential damages sustained as a result of the use of this product. Further, Shore Corporation shall not be liable for personal injuries, property damage or any other damages as a result of the use of this product, the sole responsibility of Shore Corporation under the within WARRANTY being the replacement of any nonconforming product. Acceptance and use of this product absolves Shore Corporation from any other such liability whatsoever and from whatever source. The within WARRANTY may not be modified or extended by Shore Corporation representatives or distributors, neither of which are empowered to make any product representation inconsistent with the terms hereof.
Trained representatives are available to assist with project assistance and product recommendations. Call 412/471-3330.