Preparation
Provide protection for foliage, pedestrian and vehicle traffic. Test all non-masonry surfaces for possible adverse reactions. Protect all surfaces and situations where damage may result from spillage or material drift.
All projects should start with a test application to determine cleaner suitability, dilution ratio and acceptable method for application. Test areas of at least 10 square feet are recommended and should involve the most severely contaminated area. Final determination of product acceptance should not be made until the test area has become dry.
Dilution and Coverage
Dilution: 1 to 5 parts water to 1 part product — test application recommended. See Other Product Uses below.
Coverage: Dependent upon substrate and other conditions
Application
SB 2793 ECO Power Wash is most effective when applied by low-pressure spray. Brush application and agitation may prove helpful on some surfaces. Dwell times are from 5 to 30 minutes. Do not let the cleaner dry on surfaces; mist with water or diluted cleaner to keep the surfaces wet. Removal of the cleaner and contaminant can be accomplished most
successfully with pressure washing equipment. If only garden hose rinsing is available, light scrubbing or brooming during rinsing may be required. A thorough rinsing is required. Dilutions are 0 to 5 parts water.
SB 2793 ECO Power Wash is for use by professional contractors only. Projects where complete rinsing cannot be accomplished will require an additional neutralization step. Do not use on bright aluminum, metalized glass, “self cleaning” glass or fine wood surfaces.
Safety
Causes severe skin burns and eye damage. May cause an allergic skin reaction. Causes serious eye damage.
DANGER
Refer to product SDS or product label for hazard statements, precautionary statements and safety information
Warranty
Shore Corporation warrants that this product conforms to the chemical composition described in the Product Label. SHORE CORPORATION EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Shore Corporation shall not be responsible for any direct or consequential damages sustained as a result of the use of this product. Further, Shore Corporation shall not be liable for personal injuries, property damage or any other damages as a result of the use of this product, the sole responsibility of Shore Corporation under the within WARRANTY being the replacement of any nonconforming product. Acceptance and use of this product absolves Shore Corporation from any other such liability whatsoever and from whatever source. The within WARRANTY may not be modified or extended by Shore Corporation representatives or distributors, neither of which are empowered to make any product representation inconsistent with the terms hereof.
