Products for concrete and masonry

SEARCH SOLUTION WIZARD BY

    SB 2100 ProStore Restoration Cleaner is a highly concentrated blend of acids and other beneficial additives for use in the removal of moderate to heavy exterior atmospheric soiling and most stains found on brick, sandstone, fired clay products and unpolished slate and granite. SB 2100 should not be used on marble, limestone or concrete products. When diluted with water, SB 2100 makes a highly effective, low cost cleaner for the maintenance and restoration of most exterior masonry surfaces. When properly tested a

    Solution:

    SB 2110 Restoration Cleaner is a concentrated blend of acids and beneficial additives for use in the removal of light to moderate atmospheric soiling and other stains frequently found on brick, terra cotta, sandstone, unpolished granite and unpolished slate. SB 2110 should not be used on marble, limestone or concrete surfaces. When properly diluted with water and tested, SB 2110 makes a highly effective and low-cost cleaner for the maintenance and restoration of most exterior masonry surfaces. SB 2110 is a safe

    Solution:

    SB 2112 Grimerase is a one of a new generation of restoration cleaners that is not based on hydrofluoric acid. This restoration cleaner is most effective when used as a maintenance cleaner on masonry that is lightly to moderately soiled. It may also be used as a restoration cleaner for older masonry in a similar condition. Most heavy industrial pollution may require the use of HF products or a two-step cleaning system using an alkaline pretreatment followed by the SB 2112 Grimerase.

    Solution:

    SB 2115 Heritage Restoration Cleaner is a safer alternative to the use of traditional restoration cleaners. The buffered acid in SB 2115 substantially reduces the possibility of discoloration or burning of the masonry surface. SB 2115 Heritage Restoration Cleaner has been used to remove light to moderate atmospheric soiling and is a satisfactory cleaner for some heavily soiled surfaces. SB 2115 should not be used on concrete, marble or limestone masonry. When properly tested, SB 2115 is a safer alternative to ha

    Solution:

    SB 2120 Limestone Prep is the first step in the two-step method of removing light to moderate atmospheric soiling from cut or split limestone surfaces. Unlike many other two-step systems, SB 2120 is a thin liquid that can be applied by low pressure spray. The unique blending of alkaline cleaners and additives makes this an efficient cleaner that penetrates the carbon crust to make for easy removal with pressure washing equipment. The second step is the application of SB 2130 Limestone Neutralizer as a final clea

    Solution:

    SB 2130 Limestone Neutralizer is the second step of the two-step method of cleaning light to moderate limestone surfaces. It may also be used as a one step cleaner for some lightly soiled surfaces. SB 2130 is always used after cleaning limestone, unpolished marble or concrete with either SB 2120 Limestone Prep, SB 2140 Masonry Restorer NA or SB 2150 Heavy-Duty Carbon Crust Remover. SB 2130 consists of a mild organic acid that serves as a neutralizer, cleaner and brightener of calcareous surfaces.

    Solution:

    SB 2140 Masonry Restorer NA is a highly effective non-acidic cleaner for limestone, unpolished marble, pre-cast and site cast concrete and concrete block. SB 2140 has been used successfully as a one-step cleaner for the removal of light to moderate soiling of vertical masonry as well as for the removal of grease and oil deposits, rubber heel marks and certain oxidation stains.

    Solution:

    SB 2150 Heavy-Duty Carbon Crust Remover is for use in the removal of heavy carbon and organic material buildup that has accumulated over many years of exposure to industrial and other pollutants. It may be required for cleaning the entire building facade or for removal of carbon buildup that is frequently found under eaves, windowsills and other building projections. SB 2150 can also be helpful in the detailing of water run streaks as a part of the overall building cleaning process especially when cleaning pre-c

    Solution:

    SB 2150 Heavy-Duty Carbon Crust Remover is for use in the removal of heavy carbon and organic material buildup that has accumulated over many years of exposure to industrial and other pollutants. It may be required for cleaning the entire building facade or for removal of carbon buildup that is frequently found under eaves, windowsills and other building projections. SB 2150 can also be helpful in the detailing of water run streaks as a part of the overall building cleaning process especially when cleaning pre-c

    Solution:

    SB 2171 Marble Cleaner Gel is for use in the removal of accumulations of dirt, grease, and soap deposits from marble and many other hard surfaces. SB 2171 is also safe for use on porcelain, tile, enamels and most metal surfaces. Regular use of SB 2171 will also help prevent the re-soiling of the substrate. This product is not recommended for use on painted or plastic surfaces. The SB 2171 is slightly gelled to allow better rinsing than competitive cleaners.

    Solution:

    SB 2180 Hard Surface Cleaner Concentrate is a heavy-duty concentrate designed to meet both the demanding needs of industrial and institutional customers as well as maintaining environmental responsibility. It is formulated with the EPA’s DfE listed surfactants and contains no solvents or strong alkalis. It is moderately foaming at ambient and low foaming at elevated use temperatures. It is mildly alkaline and an excellent surface cleaner and degreaser.

    For heavy-duty cleaning dilute 5 to 10 parts water

    Solution: